Wood chopper "Secko"

Category (en-gb) Hits: 381

 

Wood chopper  (for chopping branches) "Sečko"

secko stojanovic aca secka drva

 Our SECKO cuts branches, talus (toluske, čokanje), grapevine ...
Cut:
Diameter: 5-6 cm of raw wood;
Length of cut material: 2-4 cm (wood chips at the exit)
Working speed:
800-1200 rpm
Material quality:
8 knives (cutting and drawing) heat treated,
gears, sprockets, shafts are also heat treated;

Packing:
It is easily packed in bags;
jack 30-40 kg of raw wood chips
In 2-3 minutes the bag is full
The price of a bag (plastic-cloth) of 50 liters is 12-15 dinars.

Manpower:
2 people full
1 person changes bags
150-200 bags of 50 liters per day 3 people can store.

Fuel consumption:
0.8 - 1 lit / h

Heating:
300-400 bags for 100 m2 in the heating season.
The knives are cutting and pulling:
It does not cut, but 100% cuts the material;
The head of the machine is heat treated;
The machine facilitates the operation of a flywheel of 50 kg;

 

- Cardan drive that stores directly in the jack;

The price:
€ 1,500

kardanski pogon u dzakove 03

- Cardan drive with turbine (elevator) that stores directly in the trailer, etc.

The price:
€ 2,000

kardanski pogon sa turbinom 02

- Diesel drive (engine about 10 hp) that stores directly in the bag:

(Engines: Lombardini, Kiporovi, one full tank lasts all day, consumes about 8 liters of fuel and during that time cuts 200 bags)

The price:
€ 2,200

dizel motor u dzakove 07

 

Chipsara (Sečko) cardan drive with elevator

cipsara na kardan 01

Cutting:
Diameter: 10-12 cm of raw wood;
Length of cut material: 5-8 cm (wood chips on the way out)

Material quality:
2 knives (slicing) heat treated

Flywheel
Diameter: 50-60 cm, thickness 3-4 cm;

 

Chipsara (Sečko) with diesel engine and elevator

dizel motor sa turbinom 09

Cutting:
Diameter: 10-12 cm of raw wood;
Length of cut material: 5-8 cm (wood chips on the way out)


Material quality:
2 knives (slicing) heat treated


Flywheel
Diameter: 50-60 cm, thickness 3-4 cm;




video 2023 01

video 2023 02

secka za grane i gorionik za drva uros davidovic masine

secka za grane i gorionik za drva uros davidovic masine stojanovic

 
Contact:

Aleksandar Aca Stojanović

Street: Klenjska No10; 12300 Malo Laole; municipality of Petrovac na Mlavi

Phone:
+381 63 81-855-20
+381 12 346-728

E-pošta:
This email address is being protected from spambots. You need JavaScript enabled to view it.


Ing Nikola Stojanović

Street: Klenjska No10; 12300 Malo Laole; municipality of Petrovac na Mlavi

Phone:
+381 63 82-10-943

E-pošta:
This email address is being protected from spambots. You need JavaScript enabled to view it.

video kanal secka za grane i gorionik za drva masine stojanovic

Print